
The Short Answer
Yes, you can usually add a heat pump to a BC condo or townhouse. Start with your strata, not your contractor. The outdoor unit, the hole through the exterior wall and the electrical work all touch common or limited common property, so you need written strata approval before anything is installed.
Most condo heat pumps are ductless mini-splits: a slim indoor head on the wall and a compact outdoor unit on the balcony. They replace or supplement electric baseboards and add air conditioning, which is what most condo owners really want after recent summers.
CleanBC’s condo and apartment rebate can cover up to $5,000, but it’s narrower than many people expect. It’s income-qualified, limited to buildings up to 6 storeys (plus stacked townhomes and multiplexes), and requires an assessed value at or under $754,000.
Step by Step: Getting Strata Approval
Under the BC Strata Property Act standard bylaws, an owner needs written strata approval before altering the exterior, common property or limited common property such as a balcony. Your strata’s own bylaws may add more rules. A smooth approval usually looks like this:
- Read your bylaws and rules. Look for sections on alterations, balconies, exterior appearance, noise and HVAC. Some stratas already have an approved heat pump spec.
- Get a site visit and a proposal. Your contractor should document the outdoor unit location, mounting method (floor stand, wall bracket or ceiling hanger), line set route, wall penetration, condensate drainage, electrical circuit and the unit’s sound rating.
- Submit an alteration request to the strata council or property manager with the proposal, spec sheets and photos or a marked-up drawing.
- Expect conditions. Common conditions are a specific location, a colour-matched line set cover, sound limits, a building envelope consultant’s sign-off on the wall penetration, and using licensed, insured contractors.
- Sign an alteration or indemnity agreement. Most stratas make the owner responsible for maintaining the equipment, and for any damage it causes, for as long as it’s there.
- Pull permits and install. Electrical work needs a permit, and some municipalities require a mechanical permit. Work by licensed trades only.
- Provide closing documents. Stratas often want proof of permits and inspection, and the warranty information, for their records.
Allow 4-12 weeks for approval, depending on how often your council meets.
Which Heat Pump Systems Work in Condos
| System | How it works | Pros | Watch-outs |
|---|---|---|---|
| Ductless mini-split (balcony outdoor unit) | Indoor wall head + outdoor unit on the balcony, connected by refrigerant lines through the wall | Most efficient; heating and cooling; rebate-eligible models | Needs balcony space and strata approval; wall penetration |
| Multi-zone ductless | One outdoor unit serves 2-4 indoor heads | Heats/cools bedrooms separately | Larger outdoor unit; more wall penetrations |
| Through-wall / packaged heat pump (no outdoor unit) | Self-contained unit mounted on an exterior wall with two small openings | No balcony unit; simpler approval in some buildings | Less efficient, louder indoors; check rebate eligibility |
| In-suite ducted heat pump or fan coil | Replaces an in-suite furnace or fan coil in a closet | Whole-suite comfort through existing ducts | Only where the suite already has ducts; outdoor unit still needed |
| Building-wide system | Central heat pumps serving the whole building | Best long-term solution for older boiler buildings | Major strata project; engineering and capital planning |
For most condo owners, a single-zone ductless system in the main living area is the right first step. In a typical one- or two-bedroom suite, one well-placed head can heat and cool most of the space, and the existing baseboards stay as backup in bedrooms.
What It Costs
| Condo heat pump project | Typical installed cost (Lower Mainland, 2026) |
|---|---|
| Single-zone ductless (one indoor head) | $3,500 - $7,000 |
| Two-zone ductless | $6,000 - $10,000 |
| Three- or four-zone ductless | $9,000 - $15,000 |
| Through-wall packaged heat pump | $4,000 - $7,000 |
Condo-specific add-ons:
| Add-on | Typical cost |
|---|---|
| Core drilling through concrete + envelope sealing | $300 - $800 |
| Building envelope consultant review (if the strata requires it) | $300 - $1,000 |
| New 240V electrical circuit from the suite panel | $300 - $1,000 |
| Condensate pump or extended drain route | $150 - $400 |
| Line set cover, colour-matched | $150 - $400 |
| Wall bracket or ceiling-hung outdoor unit mount | $200 - $500 |
Electrical capacity is the hidden issue in older buildings. Many 1970s-90s suites have small panels. Your electrician will check whether there’s room for a dedicated circuit. If the building’s overall service is limited, the strata may need an engineer’s review before it approves multiple heat pump installations.
The CleanBC Condo and Apartment Rebate: Real Eligibility Rules
From the CleanBC Better Homes Energy Savings Program Condo and Apartment Rebate requirements (April 2026):
| Rebate | Income Level 1 | Income Level 2 |
|---|---|---|
| Ductless mini-split or multi-split heat pump (replacing electric heat) | up to $5,000 | up to $4,000 |
| Heat pump water heater (replacing an electric water heater) | up to $3,500 | up to $2,800 |
You must meet all of these:
- Income-qualified household. For example, for a household of four, combined pre-tax income up to $87,350 (Level 1) or $114,647 (Level 2). Limits scale with household size.
- Eligible building type. An apartment building up to 6 storeys (strata or rental), a stacked townhome, or a multiplex with 6+ units. High-rises above 6 storeys and detached homes aren’t eligible for this rebate.
- Assessed value at or under $754,000 for the unit (Levels 1 and 2).
- Year-round primary residence, at least 12 months old, with the utility account in the resident’s or owner’s name (not the strata’s).
- Strata consent. The strata corporation must complete the program’s Strata Corporation Consent Form.
- Registered contractor and qualified equipment. The installer must be registered with the program, and the heat pump must be on the qualified product list.
- No existing heat pump. Suites that already have a heat pump as primary or backup heat aren’t eligible.
Rules change during the year, so check the current document before you sign. Owners who don’t qualify for the condo rebate can still install a heat pump. It just won’t be subsidized under this program.
For Strata Councils and Property Managers
Strata councils and property managers face their own set of decisions, and a little planning saves every owner time:
- Approve a standard spec once. Pre-approve an outdoor unit location type, mounting method, sound limit, line set cover colour and contractor requirements. Owners who follow the spec get fast approval, and the building looks consistent.
- Check electrical capacity early. An engineer’s review tells you how many suites can add a heat pump before the building’s service needs an upgrade.
- Coordinate with the depreciation report. If the building’s boiler, make-up air unit or envelope work is coming due, a building-wide heat pump solution may be cheaper over time than piecemeal installs.
- Plan for maintenance. Outdoor units on balconies need occasional coil cleaning, and indoor heads need filter cleaning. A building-wide maintenance contract keeps everything in warranty.
Our guide to strata HVAC for property managers covers maintenance contracts, common-property equipment and planning in more detail.
Condo Heat Pumps in Vancouver, Burnaby, Richmond and New Westminster
Vancouver towers. In the West End, Yaletown, Coal Harbour and other high-rise neighbourhoods, most towers are taller than 6 storeys, so the CleanBC condo rebate doesn’t apply, but heat pumps are still very popular for cooling. Balconies are often small and exposed, so wall-bracket or ceiling-hung outdoor units and careful noise planning are common. In concrete buildings, core drilling and envelope sealing are standard. A single-zone Vancouver condo install usually lands at $4,500 to $7,000.
Burnaby (Metrotown, Brentwood, Edmonds). Burnaby has both newer towers and older 3-4 storey wood-frame buildings. The older low-rises, often heated with electric baseboards, are prime candidates for the condo rebate, as long as the household and suite meet the income and value limits. Newer towers sometimes have in-suite fan coils, where an in-suite heat pump or the building’s own system may be the better route.
Richmond. Richmond has many 4-6 storey wood-frame condo buildings and stacked townhomes, which are exactly the building types the rebate covers. Ground-floor and townhome units often have more flexibility for outdoor unit placement.
New Westminster. New Westminster’s older walk-up apartment buildings, many from the 1960s-80s, are heated with electric baseboards and have no cooling. That makes them some of the best candidates in the region for a balcony mini-split and the condo rebate. Check electrical panel capacity early in these buildings. A typical New Westminster single-zone install lands at $3,500 to $6,000.
Bottom Line
A heat pump is one of the best upgrades for a BC condo: efficient heat, real air conditioning, and lower bills than baseboards. Start with your strata bylaws and an approval-ready proposal, choose a system that fits your balcony and electrical capacity, and check whether you meet the condo rebate’s income, 6-storey and $754,000 limits before you count on the money.
Want a strata-ready proposal for your suite, or a standard spec for your building? Call 604-991-4894 or send us a message. We install and service ductless heat pumps in condos, townhomes and strata buildings across the Lower Mainland.
Frequently Asked Questions
Usually yes, with strata approval. Most condo heat pumps are ductless mini-splits with an indoor head on the wall and an outdoor unit on the balcony. Because the outdoor unit, wall penetration and electrical work affect common or limited common property, you need written approval from your strata council before installation, and the strata may set conditions on location, noise and appearance.
The CleanBC Better Homes Energy Savings Program Condo and Apartment Rebate offers up to $5,000 (Income Level 1) or $4,000 (Income Level 2) for replacing electric heat with a qualifying ductless heat pump, and up to $3,500 or $2,800 for a heat pump water heater. It is income-qualified, the unit's assessed value must be at or under $754,000, the building must be an apartment of up to 6 storeys, a stacked townhome or a multiplex of 6+ units, and the strata must sign a consent form.
No. The CleanBC condo and apartment rebate is limited to apartment buildings up to 6 storeys, stacked townhomes and multiplexes with six or more units. Owners in taller towers can still install a heat pump with strata approval, but they don't qualify for this specific rebate.
In the Lower Mainland, a single-zone ductless heat pump in a condo typically costs $3,500 to $7,000 installed, and a two-zone system about $6,000 to $10,000. Core drilling through concrete, building envelope requirements, new electrical circuits and difficult outdoor unit placement can add $500 to $2,000.
Modern variable-speed outdoor units are quiet, typically around 45 to 55 decibels at full speed and much quieter at low speed, which is where they run most of the time. Strata councils often ask for the unit's sound rating and location relative to neighbours' bedrooms and windows. Anti-vibration mounts and placing the unit away from shared walls help.
A building-wide project usually starts with an engineer's assessment of the building's electrical capacity, envelope, existing heating system and depreciation report timing. Options include standardizing an approved in-suite mini-split spec for owners, replacing a central boiler with heat pumps, or adding heat pump cooling to the ventilation system. Getting a standard spec approved once saves every owner from going through the approval process separately.



